Press
Postroenie Chertezha Po Dannym Velichinam Gdz Bolotov V.p: Kulachok
: Divide the cam's rotation into equal sectors (e.g., every 15∘15 raised to the composed with power 30∘30 raised to the composed with power ) corresponding to the points on your displacement diagram.
: Connect these points using a French curve (leka) to form the smooth working profile of the cam. Key Elements of a Cam Drawing
: At each angular position, measure the lift from the displacement diagram and mark it radially outward from the base circle. : Divide the cam's rotation into equal sectors (e
) that allows the drawing to fit the sheet while maintaining accuracy.
: Often used to smoothly transition between different radii or curves, such as arcs and straight lines. ) that allows the drawing to fit the
: Before drawing the profile, construct a motion graph (displacement diagram). This tracks the follower's lift relative to the cam's rotation angle (usually 360∘360 raised to the composed with power
: Use thin lines for construction and thick lines for the final cam profile to ensure clarity. This tracks the follower's lift relative to the
) which represents the "dwell" or starting point of the follower's motion.
Gallery
For press inquiries, please contact 