Anime-av4 «2026»

: Work toward acquiring Vanguard units such as Broly or Sunjun Wu , which are obtained through specific endgame dungeons.

: Install stabilizers, then foam, followed by leaf-spring gaskets on both sides of the plate before placing the plate onto the foam. Anime Vanguards (Alternative Match)

: Attach layer 7 to the bottom of layer 6 using four 8mm screws at the bottom front. anime-av4

features a seven-layer acrylic design with tighter tolerances than previous models.

: Before assembly, install and then remove the brass standoffs into each hole on layers 3, 4, and 5 to clear any burrs from the cutting process. : Work toward acquiring Vanguard units such as

: The top layer is 1 and counts down to 7 at the bottom. Preparation :

: Layers 4, 5, and 6 are identical. Install the brass standoffs into layer 6 , then stack layer 5, followed by layers 4 and 3. Preparation : : Layers 4, 5, and 6 are identical

: Use the included cotton gloves and microfiber cloth to keep the acrylic clean and free of fingerprints. Assembly Steps :