is a 28-inch model typically requiring a stand for stability. :
or depending on the model version) from the manufacturer or reseller site like ukoter.co.uk.
: Download the "MH series USB driver" (often listed as 721-.rar
: Place your vinyl under the pinch rollers and lock them down.
: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point. is a 28-inch model typically requiring a stand for stability
Place the holder into the carriage arm and tighten the locking knob.
typically uses commands. You must match the software settings to the cutter's hardware settings. SignCut Setup : Select "Refine" as the manufacturer and " " as the model. : Use the arrow keys on the cutter's
model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut