15138mp4 May 2026

The assembly guide for model (specifically for the Rubbermaid 6-8 ft Wardrobe Organizer ) involves setting up wall-mounted shelving and support poles. Pre-Assembly Checklist

: Attach End Caps (L, M) to the ends of the wire shelves. Note: End caps are typically only for the ends of shelving that has been cut to size. Secure Shelving :

: Install Back Clips (A) and Wall End Brackets (B) into the designated holes on your wall. Secure them by gently hammering in the Drive Pins (N) . 15138mp4

: Ensure you have Back Clips (A), Wall End Brackets (B), Wire Shelves (C, K), Support Poles (D, E, J), and Pole Shelf Brackets (F, G, H).

For a visual walkthrough of similar furniture assembly techniques like using cam locks or securing back panels, you can refer to general guides from Aosom or The Home Depot. The assembly guide for model (specifically for the

: Attach the front end of the shelves to the back side of the Support Poles using the Pole Shelf Brackets (F, G, H) .

Snap the back edge of the shelf into the and secure the flaps. Lay the front edge of the shelf into the Wall End Brackets . Secure Shelving : : Install Back Clips (A)

: You will likely need a hammer and a level to ensure the shelves are straight. Step-by-Step Installation